Add your review
Review Occupancy Sensor ecos PM/24V/12L MASTER
Occupancy Sensor ecos PM/24V/12L MASTER
in stock
An occupancy sensor with additional lightlevel switchoff. Delay time and twilight switch level are adjustable. In two variations available.
7-14 working days. From 20.12.2024 (1 pm) up to and including 05.01.2025 we will not deliver due to company holidays. We will be back for you from 06.01.2025. We wish you a Merry Christmas and a good start to 2025
- Buy 5 for €40,89 each and save 3% (€0,00 / )
- Buy 10 for €40,04 each and save 5% (€0,00 / )
- Buy 25 for €38,78 each and save 8% (€0,00 / )
Description
The ecos PM/24V/12L offers a built-in daylight sensor and an adjustable twilight level switch above which the occupancy sensing is deactivated (i.e. the artificial light remains switched off when the lights were off before you enter the room and they turn off after the delay time when they were on before and when there is now sufficient ambient light from outside). This model is usually the right choice for rooms where you often keep the artificial light off during the day due to sufficient daylight and offers you full flexibility. "The Allrounder".
- Adjustable twilight setting 100-1000 Lux, above which the occupancy sensing is deactivated.
- Adjustable delay time: 10 Sekunden bis 14 Minuten
- Potential free relay
- Suitable for installation heights of up to 12 meters
- Coverage area extension with SLAVE sensors
- Scope of delivery: clip to mount the sensors in false/suspended ceilings.
- Made in Germany
Downloads:
Data sheet ecos PM/24V/12L MASTER
Related products
ecos
Occupancy Sensor ecos PM/24V/5L MASTER
An occupancy sensor with additional lightlevel switchoff. Delay time and twilight switch level are adjustable. In two variations available.
-50%
ecos
Extension occupancy sensor ecos PM/24V/12 SLAVE
SLAVE sensor for coverage area extension of all EPV MASTER sensors. In two variations available. Up to 12 meter installation height.
ecos
2-into-1 RJ12 Adapters
Used for plugging several 24V sensors together (MASTER / SLAVE) Rule of thumb: Typically 1 unit per SLAVE sensor required.
ecos
Spring clip
For the installation of occupancy sensors in suspended one-piece ceilings (drywall, acoustic ceilings), in which the standard mounting clip can not be used.
ecos
Surface Mounting Enclosure
For surface installation if installation depth is insufficient or installation is not possible (e.g. exposed concrete ceilings).