Special offers / stock clearance
You can find all special offers here
EPV Shop
occy®
occy® Smart Home design occupancy sensor/motion detector
Mini presence detector / premium motion detector occy® Smart Home (24V) with potential-free output for Loxone, Lutron, WAGO, Beckhoff, Homematic, Comexio, Control4, Crestron etc. Noiseless and without flashing LED
occy® KNX Basic Occupancy Sensor
Ultra-small KNX occupancy sensor occy® KNX Basic. With digital PIR technology. 4 elegant installation options for your projects.
DIMMTRONIC
230V Trailing Edge Dimmer 1.000W DIMMTRONIC M1000 3.4
Trailing-edge dimmer for manual dimming (push-button mode) or 1-10V and 0-10V analog input signal dimming.
-50%
DIMMTRONIC
PWM LED-Dimmer, 3-channel 1-10V / DMX, 3 x 4A
The DIMMTRONIC LED PWM Dimmer converts up to 3 analogue 1-10V (active or passive) or digital DMX input signals into 3 pulse width modulated output signals.
ecos
Occupancy Sensor ecos PM/230V/5T
Occupancy sensor with adjustable delay time (no light sensor). Two variations available. This sensor reacts to presence - regardless of how bright the room is. In two variations available, up to 12 meter intallation height.
ecos
Occupancy Sensor ecos PM230V/5L
Small "Allround" occupancy sensor with adjustable delay time and adjustable twilight level switch. Two variations available. Perfect for retrofitting existing non-dimmable lighting. Superior sensitivity due to digiPIR technology. Made in Germany.
ecos
Occupancy Sensor ecos PM/230V/12T
Occupancy sensor with adjustable delay time (no light sensor). Two variations available. This sensor reacts to presence - regardless of how bright the room is. In two variations available, up to 12 meter intallation height.
ecos
Occupancy Sensor ecos PM/24V/5 MASTER
Simple 24V Occupancy sensor with FIXED delay time 10 minutes. Up to 5 meter installation height.
ecos
Occupancy Sensor ecos PM/24V/5T MASTER
Occupancy sensor with adjustable delay time 10 s - 14 m. No twilight switch. Two variations available. Up to 12 m installation height.
ecos
Occupancy Sensor ecos PM/24V/5L MASTER
An occupancy sensor with additional lightlevel switchoff. Delay time and twilight switch level are adjustable. In two variations available.
ecos
Occupancy Sensor ecos PM/24V/12T MASTER
Occupancy sensor with adjustable delay time 10 s - 14 m. No twilight switch. Two variations available. Up to 12 m installation height.
ecos
Extension occupancy sensor PM/24V/5 SLAVE. Can be combined with all 24V MASTER sensors
SLAVE sensor for coverage area extension of all EPV MASTER sensors. Per 1 MASTER sensor up to 30 SLAVE sensors can be added.
ecos
Extension occupancy sensor ecos PM/24V/12 SLAVE
SLAVE sensor for coverage area extension of all EPV MASTER sensors. In two variations available. Up to 12 meter installation height.
ecos
Surface Mounting Enclosure
For surface installation if installation depth is insufficient or installation is not possible (e.g. exposed concrete ceilings).
ecos
RJ 12 Cable for MASTER/SLAVE connections.
6 meter, RJ12 Cable for connecting several 24V sensors together 1-to-1 straight through cable 6P6C. 100% electrically tested.
ecos
Spring clip
For the installation of occupancy sensors in suspended one-piece ceilings (drywall, acoustic ceilings), in which the standard mounting clip can not be used.
ecos
Power Pack XL DIM
EPV Power Pack XL DIM with On/Off + daylight dimming, high-load relay output 2300VA / 800 A and 1-10V output. Supports all 24V occupancy sensors apart from the 24V/5Si.
ecos
Power Pack DALI
DALI Power Pack supports all 24V occupancy sensors. Requires one x 24V-MASTER sensor. With plug & play up to 30 SLAVES sensors for coverage extension are supported. Supports up to 45 DALI devices. 125 DALI devices may be supported with addional DALI ...
occy® Smart Home 7m extension cable
4-core extension cable (jack plug to jack socket).
This increases the distance between the sensor head and the Smart Home Powerpack, e.g. if you prefer the Powerpack in close proximity to your control system.
This increases the distance between the sensor head and the Smart Home Powerpack, e.g. if you prefer the Powerpack in close proximity to your control system.
ecos
2-into-1 RJ12 Adapters
Used for plugging several 24V sensors together (MASTER / SLAVE) Rule of thumb: Typically 1 unit per SLAVE sensor required.
ecos
Cable Adapter KA2 Set
Cable adapter to make the transition from RJ11 and RJ12) to installation cable or individual wires.
-31%
AIRCOSAVER
AIRCOSAVER Energy Saver for Air Conditioning Units
The AIRCOSAVER is an intelligent electronic retrofit control unit that adds intelligence to existing air conditioning systems and improves their energy efficiency.